The process of producing wine, which begins with fruit selection, ferments into alcohol, and is then bottled, is known as winemaking.
Harvesting, crushing and pressing, fermentation, clarifying, and finally aging and bottling are the five fundamental phases or processes involved in producing wine. There are unquestionably countless variations and deviations along the line.
Winemaking can be a fun and rewarding hence if you want to have a taste of your own creation, follow these steps
Items/Equipment’s
Primary Fermenter
The first fermentation, known as primary fermentation, produces carbon dioxide and alcohol (wine) from the sugars in the fruit juice. A primary fermenter’s type (open top, closed top, sealed, mechanized), volume, height-to-diameter ratio, material, and ease of usage are its most crucial features. Preferably, a food-grade plastic bucket with a lid.
Secondary Fermenter
The process of secondary fermentation involves moving your “finished” beer from your fermentation bucket to a different container—typically a glass carboy—where it will age for two to six months. A glass carboy or demijohn will do the magic.
Airlock and Bung
Traditional airlock for fitting to bored bung or cap in demijohns, or bored lids in fermentation buckets are good to prevent bacteria and yeast airborne and also to allow gases to escape during fermentation.
Siphoning Tube
Wine is siphoned from one container to another using this method. One-Step Sanitizer: This is an excellent all-purpose cleaner that doesn’t require rinsing. It’s important for transferring wine between containers.
Hydrometer
You can use a hydrometer in any situation when you make wine, beer, or cider. The hydrometer is used to measure the amount of dissolved brewing sugar in a recipe for beer, wine, or cider. If you observe a decrease in sugar content, fermentation is occurring and alcohol content is rising. In short, it is to measure specific gravity and track fermentation.
Sanitizer
To clean all equipment thoroughly
Bottles and Corks
For storing the finished wine
Corker
To seal the bottles
Ingredients
- Fruit
- Sugar
- Wine Yeast
- Campden Tablets
- Pectic Enzyme
- Acid Blend
- Tannin
- Yeast Nutrient
Steps for Winemaking
Prepare the Equipment by cleaning and sanitizing all equipment to avoid contamination
Prepare the Fruit Crush or press to extract juice or Chop and crush to release juices
Make the Must Mix the fruit juice (or crushed fruit) with the sugar, water, and any additional ingredients (such as acid blend and pectic enzyme). Use a hydrometer to measure the specific gravity and change the sugar concentration as necessary.
Primary Fermentation To the must, add the wine yeast. To let gasses out, cover the fermenter with a towel or a lid that fits loosely. Allow it to ferment for 7–10 days, making sure to stir every day and monitor the specific gravity.
Secondary Fermentation Empty the liquid into a glass carboy, ensuring that the sediment is removed. Fit the carboy with an airlock. Let the wine ripen for a few weeks to a few months, or until the wine clears and the fermentation considerably slows down.
Racking Racking is the procedure of periodically siphoning the wine into a clean carboy, leaving sediment behind. Every one to two months, you can do this.
Stabilizing and Aging Add Campden tablets to the wine to stabilize it and stop future fermentation when the fermentation process is finished and the wine is clear.
Depending on the type of wine, age it in the carboy for several months to a year.
Bottling Pour the wine through a sieve into sterilized bottles. Before placing the bottles on their sides, cork them and keep them upright in storage for a few days.
Enjoying Your Wine To develop its flavor, the wine should be aged in bottles for a minimum of several months.
Source: www.Muzhchin.net