Simple Steps To Repair A Washing Machine (By Yourself) – One of the things that as an individual you must know how to do is service your washing machine. At first glance, you might think that servicing your washing machine can be tedious, however, we must assure you that it is not as cumbersome as it might seem.
The mind-blowing thing is that most of your washing machine problems (over 80% of such problems) can be fixed with some simple steps that you had no idea about.
We would also urge you not to worry if you lack prior experience in appliance repair, as the list that we will be sharing contains straightforward steps and these steps are accessible to anyone. By investing a little time, gathering the necessary tools, and following clear instructions, you’ll not only save money but also gain the satisfaction of fixing your washer yourself.
Trying to fix your washing machine by yourself will not only save you the time and hassle of sending your damaged or faulty appliance to the washing machine repairer but also save you significant money as you will be spending 10s of dollars compared to spending 100s of dollars when you take it to the repair shop.
Check out the steps involved in repairing your washing machine below and you must know that you must have some tools before you begin. The tools that you need include screwdrivers, a flashlight to aid you see through the dark spaces in the washing machine, a nut driver, different sizes of pliers, and a socket or rachet.
Check for Electrical Fault
Well, as an appliance that mostly relies on electricity, the first troubleshooting that you must do is to check whether the appliance is receiving the needed power supply. The reason why you must first check whether there is an electric fault is the fact that some of the faults may be caused by an inadequate power supply to the system. When this happens, the appliance might refuse to operate and this can make you think that it is a major fault that requires sophisticated expertise. Imagine carrying your 50-kilogram washing machine to a washing machine repair shop only to be told that the fault is just an electrical fault that was fixed within five minutes. This electric fault fixed might even cost less than $20.
Check if the grinding noise has issues
Another quick fix that you can make is to check if there is a grinding noise associated with your faulty washing machine. There can be a grinding noise if your coupler is broken and if your coupler is still intact, you are good to go. Most washing machine problems associated with grinding noise can be fixed by just changing the broken coupler of your washing machine. Once you check and it is damaged, don’t panic as this can be fixed by yourself. If it is damaged, just get a new one and the price, according to our checks, is less than $30.
Washing machine encountering drainage problems
Modern washing machines are mostly faced with problems concerning their drainage. Truth be told, if you encounter such an issue, the first thought will be to send the washing to a repairer for a fix, but I can assure you that you will be able to fix this at home without the need to involve any repairer. What will make you see you have a drainage problem is that water that is supposed to drain will not do so, and also you will have some unfamiliar sounds from your washing machine. To do this, just get your tools and disconnect the tubes. Be sure to have a bowl beside you so you can drain the water into it. Once the water is drained, check the parts, especially the blades to see if they are broken. Additionally, check if the shafts that are located in the pumps rotate freely. Once you see any unusual thing, proceed to check a new part and fix it where it got damaged and you are good to go.
Your washing machine experiencing slow fill or no fill
Slow fill or no fill has to do with water not filling your washing machine in order to use it for the intended purposes. One thing that you must know about such an issue is that it is associated with the water valve which can be choked when not cleaned for a while. When you encounter such an issue with your washing machine, just go ahead and check these valves to see whether they are choked or not. If it happens that they are choked, all that you have to do is to clean these valves. There can be a point where even after cleaning, the issue will still persist try changing these valves which costs not more than $50.
Source: ww.Muzhchin